1966 Chevrolet 1/2 TON STEPSIDE

$34,000

Year
1966
Make
Chevrolet
Model
1/2 TON STEPSIDE
Stock
2909
Vin
C1446S14xxxx
Miles
21,130
Engine Size
350 CI V-8
Transmission Type
700R4
Drivetrain
RWD

C/K is a series of trucks that were manufactured by General Motors from the 1960 to 2002 model years. Marketed by both the Chevrolet and GMC divisions, the C/K series encompassed a wide range of vehicles. While most commonly associated with pickup trucks, the model line also included chassis-cab trucks and medium-duty trucks and served as the basis for GM full-size SUVs. Through its entire production, the model line competed directly against the Ford F-Series and the Dodge D series (later the Dodge Ram pickup).

Used for both the model branding and the internal model code, "C" denoted two-wheel drive; "K" denoted four-wheel drive. Four generations of the model line were produced, including the second-generation "Action Line" and third-generation "Rounded Line" vehicles. GMC marketed its version of the fourth-generation C/K pickup truck under a singular GMC Sierra nameplate. The C/K was manufactured for South America by General Motors Brazil, who produced variants of the model line for Brazil, Argentina, and Chile.

First generation (1960–1966)

Launched in the fall of 1959, the 1960 model year introduced a new body style of light pick-up truck that featured many firsts. Most important of these were a drop-center ladder frame, allowing the cab to sit lower, and independent front suspension, giving an almost car-like ride in a truck. Also new for 1960 was a new designation system for trucks made by GM. Gone were the 3100, 3200, and 3600 designations for short 1/2, long 1/2 and 3/4-ton models. Instead, a new scheme assigned a 10, 20, or 30 for 1/2, 3/4, and 1-ton models. Since 1957, trucks were available from the factory as four-wheel drive, and the new class scheme would make this known. A C (conventional) in front of the series number designates two-wheel rear drive while a K designates four-wheel drive.

Actual badging on Chevrolet trucks carried the series name system from the previous generation for 1960 and 1961: the 10, 20, 30, and 40 series (C and K) were badged as "Apaches", 50 and 60 series trucks were badged as "Vikings", and the largest 70 and 80 series models were marked "Spartans". For 1960, C/K trucks were available in smooth "Fleetside" or fendered "Stepside" versions. GMC called these "Wide-Side" and "Fenderside". Half-ton models were the C10 and K10 long-bed and short-bed trucks, and The 3/4-ton C20 and K20, as well as the one-ton C30, were also available. GMC did not use the "C" nomenclature, though their 4x4 versions used the "K" nomenclature. GMC model numbers for 1/2, 3/4, 1, and 1.5 ton were 1000, 1500, 2500, and 3000. The 1.5 ton Chevrolet C40 and GMC 3000, which were using the light-duty cab[4][5] (but only as chassis-cab and stake models), were discontinued for the 1963 model year.

1966 CHEVROLET 1/2 TON SHORTBED
CLEAN TITLE IN HAND
MAT BLACK EXTERIOR WITH RED INTERIOR
FRESH 350 CI V8 ENGINE
700R4 TRANSMISSION
POSITRACTION REAR END
NEW INTERIOR
POWER STEERING
POWER BRAKES
WHITEWALL TIRES
CHROME HUBCAPS
RUNS, DRIVES AND SOUNDS GREAT

Engine

Engine Type
Engine Size
350 CI V-8
Fuel Specification

Body

Body Color
Black
Body Style
Pickup Truck
Doors
2
Paint Type

Basic

Year
1966
Make
Chevrolet
Model
1/2 TON STEPSIDE
Miles
21,130

Interior

Interior Color
Red
Secondary Interior Color
Seating Type
Seat Material
Shifter Type
Center Console
No

Contact Us About This Vehicle

-or-

Fill out the Form below:

Contact Details